Brother MFC-P2000 Podręcznik szybkiej konfiguracji - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Wszystko w jednej drukarce Brother MFC-P2000. Brother MFC-P2000 43 stron. Laser printer / scanner / copier
Drukuj stronę
What Does Remote Printer Console Do?
The Remote Printer Console (RPC) is a utility program which runs in the DOS environment
and comprises the following two programs:
Remote Printer Console Main Program
This program allows you to change various machine settings such as emulation, print
quality, fonts, page setup and so on from your computer screen. Since most DOS
applications have a machine settings menu which overrides the settings made by the RPC,
you may not need to use this utility program. This utility program is useful for application
software which does not control the machine's settings and features.
Machine Status Monitor Program
This utility program can monitor your machine's status using bi-directional parallel
communications. If your machine has no paper, this utility program displays "Paper
Empty" error status and instructions for corrective action on your computer screen. This
utility program stays resident in your computer memory (Terminate-and-Stay Resident
program) and runs in the background.
Installing the Remote Printer Console
Before you install the program, make sure that you have the following hardware and software:
DOS
Version 3.3 or later
Monitor
EGA/VGA or compatible
Option
Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
1. Make sure your machine is connected to your computer and is ready (On-line).
2. Start your computer. If you are in Windows, exit and return to the DOS prompt. You must
be in the DOS prompt to proceed with installation.
3. Insert the supplied disk into your floppy disk drive (A: or B:).
4. Select drive A or B to be used by typing A: or B: after
the DOS prompt and pressing the Enter key.
5. Type RPCSETUP and press the Enter key.
6. Follow the instructions on the screen.
- 13 -
C:\>A:
A:\>RPCSETUP