LG 19CNV42K Cloud V Series Instrukcja obsługi - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor LG 19CNV42K Cloud V Series. LG 19CNV42K Cloud V Series 50 stron. Lg cloud v series monitor (led monitor)
Również dla LG 19CNV42K Cloud V Series: Instrukcja obsługi (50 strony)

Drukuj stronę

Network Tab

The Network tab allows the administrator to config-

ure the portal network parameters.

NOTE

The network parameters can also be con-

figured using the Webpage Administration

Interface.

Figure 2-7. Network Configuration

y Enable DHCP

If the Enable DHCP option is selected, a device will

be connected to the DHCP server. that allocates

the IP address, subnet mask, gateway IP address,

and DNS server. If this option is disabled, the

above parameters must be configured manually.

y IP Address

The IP Address field contains the IP address of the

device. If DHCP is disabled, this field is required.

If DHCP is enabled, this field cannot be edited.

This field must contain the correct IP address. If an

incorrect IP address is provided, an OSD message

is displayed prompting the administrator to provide

the correct the IP address.

y Subnet Mask

The Subnet Mask field contains the subnet mask

of the device. If DHCP is disabled, this field is

required. If DHCP is enabled, this field cannot be

edited. This field must have the correct subnet

mask. If an incorrect subnet mask is provided, an

OSD message is displayed prompting the adminis-

trator to provide the correct the subnet mask.

Using CLOUD Solution

y Gateway

The Gateway field contains the gateway IP ad-

dress of the device. If DHCP is disabled, this field

is required. If DHCP is enabled, this field cannot be

edited.

y Primary DNS Server

The Primary DNS Server field contains the primary

DNS IP address of the device. This field is option-

al. If DHCP is enabled, this field cannot be edited.

y Secondary DNS Server

The Secondary DNS Server field contains the sec-

ondary DNS IP address of the device. This field is

optional. If the DHCP is enabled, this field cannot

be edited.

y Domain Name

The Domain Name field contains the domain name

used, e.g. "domain local". This field is optional. It speci-

fies on which domain the host or portal operates.

y FQDN

The FQDN field represents the Fully Qualified Do-

main Name of the host or portal. The default value is

PCoIP-host-MAC or PCoIP-portal-MAC, where MAC

is the MAC address of the host or portal. If there is

a domain name, it will be added to the FQDN in the

format of PCoIP-host-MAC.domain.local

NOTE

In order to utilize the FQDN feature, a DNS

server, configured properly with DHCP option

81, must be used.

y Ethernet Mode

The Ethernet Mode field specifies the portal's Eth-

ernet mode.

The available options are as follows.

y Auto

y 100 Mbps Full-Duplex

y 10 Mbps Full-Duplex

If another network device (for example, a switch) is

configured to operate under 10 Mbps Full-Duplex,

100Mbps Full-Duplex or 1GbpsFull-Duplex, the

administrator should always set the Ethernet Mode

field to Auto; and if the device is to operate under

only one speed out of multiple settings, select ei-

ther 10 Mbps Full-Duplex or 100 Mbps Full-Duplex.