A-Link IPC3 Instrukcja szybkiej instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Kamera IP A-Link IPC3. A-Link IPC3 7 stron. 1.3 mega-pixel / multi-profile ip camera

Drukuj stronę

Note 1: If no IP address is assigned within 30 seconds, the networked device will

automatically assign 192.168.0.100. User may now open your web browser, and key in

http://192.168.0.100

web configuration page.

Note 2: Power Line Frequency

If you found the video image is flash, you may need to choose 50 or 60 Hz frequency

(depends on country).

World wide power line frequency table is inside user's manual, Appendix

Note 3: If you have problem when connecting the network camera to a router, please read

user's manual inside CD, the section "Installation to a router".

After connected to networked device, the device will prompt for User name and Password.

For the first time, please enter: admin as username and no password to continue Web

Management.

If difficulty is met, please refer to the following steps to establish the connection:

The A-Link IPC3 must be installed and powered ON.

If the A-Link IPC3 default IP Address (192.168.0.100) is already used by another device, the

other device must be turned OFF until the device is allocated a new IP Address during

configuration.

in the address bar of you web browser to logon Network Camera's