AEG L 63472 FL Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG L 63472 FL. AEG L 63472 FL 24 stron.
Drukuj stronę
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
9.3 Activating the appliance
Press Marche/Arrêt to activate or deacti-
vate the appliance. A tune sounds when
the appliance is activated.
9.4 Setting a programme
1.
Turn the programme knob and set
the programme:
• The indicator Départ/Pause flash-
es.
• The display shows the programme
duration.
2.
If necessary, change the tempera-
ture, the spin speed, the cycle dura-
tion, or add available options. When
you activate an option, the indicator
of the set option comes on.
If you set something incorrect,
the display shows the message
Err.
9.5 Starting a programme
without delay start
Press Départ/Pause:
• The indicator Départ/Pause stops to
flash and stays on.
• The programme starts, the door is
locked and the display shows the indi-
cator
.
• The drain pump can operate for a
short time when the appliance fills wa-
ter.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts auto-
matically the programme dura-
tion agree with the laundry
load.
• The display shows the new val-
ue.
9.6 Starting a programme with
delay start
• Press Départ Différé again and again
until the display shows the delay you
want to set.
• Press Départ/Pause:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you
press Départ/Pause.
To cancel the delay start:
1.
Press Départ/Pause to set the appli-
ance to pause.
2.
Press Départ Différé until the display
shows
'.
Press Départ/Pause again to start
the programme immediately.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press Départ/Pause. The indicator
flashes.
2.
Change the options.
3.
Press Départ/Pause again. The pro-
gramme continues.
9.8 Cancel a programme
1.
Turn the programme knob to
to cancel the programme.
2.
Turn again the programme knob to
a new washing programme. At this
time you can also set the available
functions.
The appliance does not drain the
water.
ENGLISH
13