Brother Business Smart MFC-J4510dw Podręcznik - Strona 13

Drukuj stronę

Brother Business Smart MFC-J4510dw Podręcznik

Troubleshooting

Overview

This section explains how to resolve typical network problems you may encounter when using the Brother

machine. If, after reading this chapter, you are unable to resolve your problem, visit the Brother Solutions

Center at http://solutions.brother.com/.

For details, go to the Brother Solutions Center at (http://solutions.brother.com/) and click Manuals on your

model page to download other manuals.

Identifying the problem

Make sure you have checked the following:

The power cord is connected correctly and the Brother machine is turned on.

All protective packaging has been removed from the machine.

The ink cartridges are installed correctly.

The front and back covers are fully closed.

Paper is inserted correctly in the paper tray.

Go to the page for your solution from the lists below

Problem

I see error messages when configuring the Wi-Fi Direct from the control panel menu

I cannot complete the Wi-Fi Direct network setup configuration

I want to make sure that my network devices are working correctly

Error messages when configuring Wi-Fi Direct from the control panel menu

Error Message

(For MFC-J2510/J4510DW)

Connection Fail

(For MFC-J2510/J4510DW)

Connection Error

Cause

The Brother machine and your mobile

device cannot communicate during the

configuration.

Other devices are trying to connect to the

Wi-Fi Direct network at the same time.

See page

Action



Move the mobile device closer to your

Brother machine.



Move your Brother machine and the

mobile device to an obstruction-free

area.



If you are using the PIN Method of WPS,

make sure you have entered the correct

PIN.

Make sure there are no other devices trying

to connect to the Wi-Fi Direct network and

then try to configure the Wi-Fi Direct

settings again.