Fujitsu Eternus DX440 S2 Podręcznik użytkownika - Strona 19

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przechowywanie Fujitsu Eternus DX440 S2. Fujitsu Eternus DX440 S2 35 stron. Disk storage system settings
Również dla Fujitsu Eternus DX440 S2: Podręcznik użytkownika (42 strony), Konfiguracja instalacji (20 strony), Podręcznik konfiguracji (28 strony), Podręcznik konfiguracji (15 strony)

Chapter 3

Notes

3.8

VERITAS Volume Manager (VxVM) Notes

3.8

VERITAS Volume Manager (VxVM) Notes

If the ETERNUS DX Disk storage systems are connected to a configuration that uses the VxVM, the VERITAS

•

Array Support Library (ASL) will also need to be installed. Check and obtain the VERITAS ASL version that

matches the installation environment of the ETERNUS DX Disk storage system from the Symantec web-site.

Install VERITAS Array Support Library (ASL) after installing VxVM.

•

When using VxVM 5.1

•

ASL does not need to be installed.

•

If a path degrades when VERITAS Volume Manager is used, some volumes may not be successfully recog-

nized after path restoration regardless of the Linux version or VxVM version that is installed. In this case,

volume recognition is required after restoring the LUN using the utility provided by each Fibre Channel card

vendor. Refer to

er Environment " (page 31)

3.9

•

Installing VERITAS Cluster Server

VERITAS Cluster Server should be installed according to the directions given in the documentation provided

with VERITAS Cluster Server.

3.10

Notes on Connecting the ETERNUS DX Disk Storage System

to a Server

When connecting the ETERNUS DX Disk storage system to a server using a Fibre Channel cable, make sure to

confirm that all the settings on the ETERNUS DX Disk storage system are complete. The WWN Automatic Ac-

quisition function should not be used because it requires the server to be connected. Otherwise, LUNs in the

ETERNUS DX Disk storage system may not be recognized properly.

3.11

When using an ETERNUS DX Disk storage system LUN (Logical Unit) as the boot disk, check the "Server Sup-

port Matrix" for the server environment being used, as well as any SAN boot documentation (such as in a

system installation guide) provided with the server.

When an ETERNUS DX Disk storage system LUN is to be used as a boot disk, it must be provided with suffi-

cient capacity to install the OS.

ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux

"Appendix A Restoration Procedure for when a Path Degrades in a VERITAS Volume Manag-

for details.

P3AM-3842-12ENZ0