Brother MFC 620CN - Color Inkjet - All-in-One Podręcznik szybkiej konfiguracji - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Serwer druku Brother MFC 620CN - Color Inkjet - All-in-One. Brother MFC 620CN - Color Inkjet - All-in-One 37 stron. Control panel overview
Również dla Brother MFC 620CN - Color Inkjet - All-in-One: Podręcznik szybkiej konfiguracji (37 strony), Lista referencyjna części (30 strony), Przegląd (3 strony)
Drukuj stronę
Step 1
• DO NOT remove ink cartridges if
• DO NOT shake the ink cartridges.
• DO NOT insert and remove the
• DO NOT dismantle or tamper
• Brother inkjet machines are
■ If you mix the colours by installing an ink
cartridge in the wrong position, you must
clean the print head by running several
cleaning cycles after correcting the
cartridge installation. (See "Cleaning the
print head" in chapter 11 Troubleshooting
and Routine Maintenance of the User's
Guide.)
■ Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.
8
Setting Up the Machine
you do not need to replace them.
If you do so, it may reduce the ink
quantity and the machine will not
know the quantity of ink left in
the cartridge.
If ink stains your body or
clothing, wash with soap or
detergent immediately.
cartridges repeatedly. If you do
so, the ink may seep out of the
cartridge.
with the ink cartridge, this can
cause the ink to leak out of the
cartridge.
designed to work with ink of a
particular specification and work
to a level of optimum
performance when used with
genuine Brother ink cartridges.
Brother cannot guarantee this
optimum performance if ink or
ink cartridges of other
specifications are used. Brother
does not therefore recommend
the use of cartridges other than
genuine Brother cartridges with
this machine or the refilling of
empty cartridges with ink from
other sources. If damage is
caused to the print head or other
parts of this machine as a result
of the use of ink or ink cartridges
other than genuine Brother
products due to the
incompatibility or lack of
suitability of those products with
this machine, any repairs
required as a result will not be
covered by the warranty.
Print Quality Check
6
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
Press Start
2
Make sure the paper is loaded in the paper
tray.
Press Colour Start.
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
3
Check the quality of the four colour blocks
formed by the short lines printed on the
sheet.
(BLACK/ CYAN/ YELLOW/ MAGENTA)
Print Quality Check
1. Check the quality of the four-color blocks formed by the short lines.
2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.
Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process
and follow the prompts on the LCD.
Avoid touching the printed surface
of the paper immediately after
printing, the surface may not be
completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
1.Yes 2.No