AEG OKO-LAVAMAT BELLA2100 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz AEG OKO-LAVAMAT BELLA2100. AEG OKO-LAVAMAT BELLA2100 45 stron. Aeg the environmentally friendly washing machine

Drukuj stronę

Description of the appliance

Programme Option buttons

Depending on the programme, different functions can be combined.

These must be selected after choosing the desired programme and

before depressing the START/PAUSE button.

When these buttons are pressed, the corresponding pilot lights come on.

When they are pressed again, the pilot lights go out.

STAIN

To treat heavily soiled or stained laundry with stain remover (extended main

wash with time optimised stain action phase, not selectable for wool or pro-

grammes with temperatures lower than 40°C).

This function cannot be used with QUICK

, SOAK

and PREWASH

QUICK

By pressing this button the washing time is reduced. For use when

washing lightly soiled laundry.

This option is not available with cotton 50°, the wool and economy pro-

gramme and cannot be used with STAIN

SOAK

The machine performs a soak of about 30 minutes at 30°C. By pressing

the DELAY START button

the soak time can be prolonged up to 10

hours max. After this time the wash cycle will automatically start.

This function cannot be used with WOOL, PREWASH

or STAIN

programme.

The soak programme ends with a short spin in programmes for Cotton

and Synthetics, and with emptying of the water without spinning for

Delicates.

PREWASH

The machine performs a prewash cycle at 30°C max. The prewash cycle

ends with a short spin in programmes for Cotton and Synthetics, and

with emptying of the water without spinning for Delicates.

This option is not available with the wool programme and cannot be

used with SOAK

and STAIN

For use when washing heavily soiled laundry.

Important: By depressing at the same time buttons

and

the

machine will perform an extra rinse (see page 23).

By depressing at the same time buttons

and

the acoustic signal

at the end of programme is suppressed.