AEG OKO-LAVAMAT BELLA2100 Instrukcja obsługi - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz AEG OKO-LAVAMAT BELLA2100. AEG OKO-LAVAMAT BELLA2100 45 stron. Aeg the environmentally friendly washing machine

Drukuj stronę

Something not working?

If during the spin cycle the machine makes an unusual

whistling noise, different from the noise made by tradi-

tional washing machines, this is due to a new type of

motor.

If water is not visible in the drum, this is due

to the modern technology of new washing

machines that use less water than traditional

machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the

instructions below.

If you call out an engineer when one of the following problems arises,

or to repair a fault due to incorrect use, the call-out will be charged

even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

E10: problem with the water supply (phase light

E20: problem with water draining (phase light

E40: door open (phase light

Once the problem has been eliminated, press the START/PAUSE button

to restart the programme. If after all checks, the problem persists, con-

tact your local AEG Service Force Centre.

Problem

The machine does not work

is on)

Possible cause

The main electrical fuse

has blown.

The door is not properly

closed (E40).

The plug is not connected. Insert the plug.

The START button has not

been pressed.

The DELAY START

option has been selected.

is on)

Solution

Replace the fuse.

Close the door; the click

of the lock should be heard.

Press the button.

Check the selected delay on

the display.