Indesit F104102 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Indesit F104102. Indesit F104102 48 stron.

ELECTRICAL CONNECTION

WARNING

The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the regulations

provided in this chapter.

The power cable must be long enough to allow the hob to be removed from the worktop.

Make sure the voltage specified on the dataplate located on the bottom of the appliance is the same as that of the home.

1. Remove the terminal cover (A) by unscrewing the screw and insert the cover into the hinge (B) of the terminal.

2. Plug the power cord into the clamp and connect the wires to the terminal block as shown in the wiring diagram located near the terminal.

3. Secure the power cable with the cable clamp.

4. Close the cover (C) and screw on the terminal with the screw removed.

For each connection to the network, the hob automatically checks for a few seconds.

black

brown

blue

}

blue (grey)

yellow/green

Disconnect the appliance from the power supply.

Installation must be carried out by qualified personnel who know the current safety and

installation regulations.

AU and UK

black

}

brown

yellow/green

blue

}

blue (grey)

ONLY FOR BELGIUM

black

brown

blue

}

blue (grey)

yellow/green

EN8

blue/grey

black/brown

yellow/green

Connection to main power

230V 2 phase 2N

ONLY FOR NL

black

brown

yellow/green

blue

blue (grey)