ACA SPC-01 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler ACA SPC-01. ACA SPC-01 4 stron.

Below is a typical installation wiring to a 12 to 24vdc power supply.

Red cable

Black cable

Yellow cable

Green pipe

Black pipe

5. Installation

The SPC-01 controller is provided with two mounting slots suitable for M3 screws for mounting

onto a flat vertical surface. Although orientation is not critical for operation, it is suggested that

vertical mounting is generally used.

6. Functions

This controller is ready to operate the moment it is connected to power. The output

automatically modulates to maintain pressure at the desired pre-programmed setpoint.

7. System settings

This controller has no system settings available although pressure setpoint can be programmed

during manufacture of this unit so please specify during ordering.

• Zero Calibration:

at any time in the future if so required.

• Span Calibration:

at any time in the future if so required.

• Output: The DAC output is set to operate in the range of 1.6 to 10.0v. If the output needs to be

capped at a lower voltage within the range of 1.6 and 10.0V please specify when ordering.

+12 to 24V supply

Supply ground (negative battery terminal)

1.6 to 10v DAC control output

Positive pressure input

Negative pressure input or static pipe

Is carried out during manufacture and can be performed again at our factory