Kohler K-1184 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wanny Kohler K-1184. Kohler K-1184 17 stron. Flanged acrylic bath with integral apron
Również dla Kohler K-1184: Instrukcja instalacji i obsługi (29 strony), Instrukcja instalacji i obsługi (25 strony), Instrukcja instalacji (21 strony)

Clear spaces

for support

blocks.

3. Secure the Bath to the Subﬂoor

CAUTION: Risk of product damage. Do not support the bath by the rim.

Choose the installation option that best applies to your particular installation.

If the subﬂoor is not level, shim the bath support blocks as necessary.

Option 1: Secure Using Cement or Mortar Bed

Spread a 2" (5.1 cm) thick layer of cement or mortar on the subﬂoor where the bath will be placed.

This will help secure, level and support the bath.

NOTE: The support blocks must rest directly on the support ﬂoor.

Clear all the material away from the support block locations.

NOTE: Do not use gypsum cement or drywall compound for this application, as they will not provide an

acceptable, durable bond.

Position a piece of plastic drop cloth or similar material over the cement or mortar bed.

With help, carefully lift the bath into place and make sure the support blocks do not rest in the bed

material. Verify that the bath is level and resting on all support blocks.

Insert the drain tailpiece into the trap.

NOTE: An access panel will simplify future maintenance.

Option 2: Secure Using Construction Adhesive

Apply a generous amount of high-quality construction adhesive to the bottom of the support blocks.

With help, carefully lift the bath into place and verify it is level and resting on all support blocks.

Insert the drain tailpiece into the trap.

NOTE: An access panel will simplify future maintenance.

Option 3: Secure Using Silicone Sealant

With help, carefully lift the bath into position.

Insert the drain tailpiece into the trap.

Verify that the bath is level and resting on all support blocks.

Apply a continuous bead of silicone sealant around the entire rim of the bath.

NOTE: An access panel will simplify future maintenance.

1014128-2-D

Apply a bead of

silicone sealant

around the entire rim

Spread a 2"

(5.1 cm) layer

of cement or

mortar bed

Apply construction

material.

adhesive to the

support blocks.

Kohler Co.