Acard AEC-7732U Skrócona instrukcja instalacji

Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji dla Systemy wejścia/wyjścia Acard AEC-7732U. Acard AEC-7732U 3 stron. Bridge

AEC-7732U Bridge Install Quick Guide

Chapter 1

1.1 Overview

AEC-7732U is an internal SCSI-to-SATA-II ODD Bridge, which turns a

standard 5.25"SATA ODD into a 50-pin Ultra SCSI ODD. It is easy and

efficient for users to create or replace their old Ultra SCSI ODD.

1.2 Specification

Ultra SCSI interface for up to 20MB/sec data transfer rate.

On-chip high speed ACARD RISC micro-controller.

Supports SATA ODD.

Supports Windows 2000/XP/2003 Server/Vista, Linux.

On board flash ROM for easy firmware upgrade.

Selectable SCSI ID from 0 to 7.

Temperature:

Dimension: 12.5cm x 3.5cm x 2.6cm (L x W x H)

Chapter 2

2.1 Connector introduction

CN1 ---- 4-pin power connector

CN2 ---- SATA connector (includes power and data bus)

CN5 ---- SCSI connector

JP1 ---- Jumpers, Refer to 2.2 for detail

CN2(power) CN2(data)

Introduction

Operation --- 0 ° C to 45 ° C

Storage

Installation

CN5

--- -20 ° C to 70 ° C

Version 1.0

JP1

CN1