Aqua Medic T controller CC Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Aqua Medic T controller CC. Aqua Medic T controller CC 10 stron.
Również dla Aqua Medic T controller CC: Instrukcja obsługi (12 strony), Instrukcja obsługi (13 strony)
Drukuj stronę
Digital measuring and regulating unit to control a cooling device
With the purchase of this digital measuring and regulating unit, you have selected a top quality product. It has
been specifically designed for aquaristic purposes. With this unit, you can continuously measure and control the
temperature of the water in your aquarium.
1. Product Description
The Aqua Medic Temperature Controller T 2001 CC is generally delivered with a saltwater-resistant temperature
sensor. The unit is ready for connection.
2. Cooling Unit
The Temperature Controller can be connected to a cooling aggregate or another cooling unit (i. e. fan, chilled
water supply). The maximum output amounts to approx. 600 watts.
3. Description of the front panel
1. Display
2. Control light
3. Measurement adjustment knob
4. Set-knob for adjustment
5. Temperature sensor for adjustment
6. Power plug
4. Installation
-
Connect to 220 V power source.
-
Set the switch (3) to „T" (display of temperature).
-
Place the temperature sensor into the aquarium and fix it with an Aqua Medic electrode holder. After a few
minutes, the actual temperature of aquarium water is indicated.
5. Adjusting nominal values
-
Put switch 3 to „Set" to adjust the desired value. To change the value, use the „Set" knob (4).
-
Set switch 3 back to „T". The unit is now ready for use.
-
As soon as the temperature value exceeds the adjusted value, the unit activates the power plug (6) and
switches on the consumer (cooler).
Operation Manual ENG
4