aqua metro CONTOIL DFM 8ECO Instrukcja montażu i obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Rejestratory danych aqua metro CONTOIL DFM 8ECO. aqua metro CONTOIL DFM 8ECO 20 stron.

Drukuj stronę
Connecting the CONTOIL
CONTOIL
DFM 8ECO
®
Brown (Ground)
Green (Supply line)
White (Return line)

Startup (commissioning)

In this section we assume that all instruments required have been installed in a correct and professional way, which
means
The fuel system is purged according the engine manufacturer's advices, and is free of leaks or air bubbles
If this is not the case, please make sure the system is properly ready.
1. Start the engine and let it run at min. load until it has reached its operating conditions (heat exchange water
between 70 °C and 90 °C).
2. Check all connections are free of leaks.

What is to do if it is not functioning?

No signal or incorrect values on the fleet manager or GPS system
Check the following:
a.
Do you have minimum 12 VDC on the CONTOIL
b.
Did you choose the right wire/output signal? (see Electrical connection)
c.
Check the wires for proper connection to the connectors
d.
Are all settings on the Fleet Manager or GPS system correct?
e.
It still does not work?
Contact your local dealer for more information.
CONTOIL
DFM 8ECO
®
DFM 8ECO to the CONTOIL
®
DFM - Board Computer
Total
18598 l
®
DFM 8ECO? (see Electrical connections and specifications)
DFM-BC
®
OK
ESC
11