AVPro Edge ConferX AC-CXMF62-AUHD Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik matrycowy AVPro Edge ConferX AC-CXMF62-AUHD. AVPro Edge ConferX AC-CXMF62-AUHD 6 stron. 6 input, 2 output multi-format classroom/conference room matrix switcher

Video Scaler Mode
• This will set the scaler mode for OUTPUT 1, the options are:
• BP = Bypass - Scaler is disabled (Default)
• 4K-2K = 1080P - If incoming signal is 4K, it will be downscaled to 1080P or 1900x1200 depending on the
input format.
Audio Status
• Enable or Disable extracted Audio, the options are:
• ON = Extracted audio ports are ON (Default)
• OFF= Extracted audio ports are muted.
Audio Binding
• Bind the audio to a specific OUTPUT. The audio will always follow one output, this
• means the audio switches with the video of the output you designate, the options are:
• OUT1 = Extracted audio will follow HDBT OUTPUT (Default)
• OUT 2= Extracted audio will follow HDMI OUTPUT

Test Pattern

• Generate a 1080p test pattern to a specific OUTPUT.
• OUT1 = Generate a test pattern on HDBT OUTPUT
• OUT 2= Generate a test pattern on HDMI OUTPUT
IR Control
• For IR Control there is an IR Window on the front face of the device
RS-232 control:
In order to connect your computer to the swtich by RS-232 you need to make your own cable with one end a
phoenix connector and the other end a RS-232 port. Your computer doesn't have a RS-232 input, get a USB
converter (as shown below), and plug the USB end into any computer.
RS232 can be extended over HDBT as well. Use the HDBT 3 Pin Phoenix to broadcast directly to your HDBT Input/
Output.