AVProConnect AC-MXMV122-UHD Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz AVProConnect AC-MXMV122-UHD. AVProConnect AC-MXMV122-UHD 20 stron. Video flux
Drukuj stronęAC-MXMV122-UHD
Keyword
The following commands can only be used while in MODE1 (HD MV)
0000H
Set display
parameter (top-
left and bottom-
right coordinates
and display
priority) for all 4
inputs
0001H
Set display priority
of the 4 input
images.
0002H
Set the coordinate of
the image with the
highest priority
0003H
Set the coordinate of
the image with the
0004H
Set the coordinate
0005H
Set the coordinate
the lowest priority
0050H
Set the
transparency
0051H
Background colour
The following commands can only be used while in MODE2 (4:2 MX)
1000H
Set the source for
the two output
ports
The following commands can only be used while in MODE3 (4K)
2000H
4KMV or the
source of single
1080P output
The following commands can only be used while in MODE1 & MODE3
2820H
Set audio route
when in MV mode
2852H
Color of the image
border
2853H
Width of the
image border
The following commands can only be used while in MODE1 & MODE2 & MODE3
3800H
Select input video
source for the four
inputs
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
Description of
Length of Parameter
Keyword
WRITE SETTINGS COMMANDS
second priority
of the image with
the third priority
of the image with
Description of
Parameter
36 BYTES
Refer to Table 4
4 BYTES
Refer to the
data from 1 to
4 in Table 4
8 BYTES
Refer to the
data from 5 to
12 in Table 4
8 BYTES
Refer to the
data from 12 to
20 in Table 4
8 BYTES
Refer to the
data from 21 to
28 in Table 4
8 BYTES
Refer to the
data from 29 to
36 in Table 4
1 BYTE
Refer to Table 5
3 BYTES
Refer to Table 6
2 BYTES
Refer to Table 7
2 BYTES
Refer to Table 8
2 BYTES
Refer to Table 9
3 BYTES
Refer to Table 6
1 BYTE
Refer to Table
10
4 BYTES
Refer to Table
11
pg. 9
Note
Not
recommended,
use the next 5
commands to
set the
parameters
individually