Avsl 171.917UK Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Mikrofon Avsl 171.917UK. Avsl 171.917UK 5 stron. Dual uhf wireless system

Drukuj stronę

Specifications

Model

Dimensions: handheld

Weight: handheld

Dimensions: beltpack

Weight: beltpack

Power supply

Antenna connection

Batteries

Carrier frequencies

RF power

Range

Microphone: polar pattern

Output connections

Output impedance

Output level

Frequency response

S/N ratio

THD

Dimensions: receiver

Weight: receiver

Troubleshooting

"POWER" LED does not light on

receiver

"POWER" LED is lit but no "RF"

or "AF" LEDs

"POWER" and "RF" LEDs are lit

but no "AF" and no sound

All LEDs lit but no sound from

mic

Microphone output is very loud

or distorted

Microphone output is very low

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Hereby, AVSL Group Ltd. declares that the radio equipment type 171.907UK, 171.908UK, 171.917UK and 171.918UK is in compliance with

The full text of the EU declaration of conformity for 171.907UK is available at the following internet address:

The full text of the EU declaration of conformity for 171.908UK is available at the following internet address:

The full text of the EU declaration of conformity for 171.917UK is available at the following internet address:

The full text of the EU declaration of conformity for 171.918UK is available at the following internet address:

SU20-H-RG

SU20-H-BY

250 x 47mmØ

231g (no battery)

N/A

14Vdc 500mA (adaptor supplied)

BNC

4 x AA (2 per transmitter) included

863.42MHz (Red), 864.3MHz (Green), 864.8MHz (Blue), 863.1MHz (Yellow)

10mW

60m

Cardioid (handheld, neckband or lavalier)

2 x balanced XLR, 1 x unbalanced 6.3mm jack

2.2k Ohms

400mV (balanced), 200mV (unbalanced)

50Hz - 18kHz (±3dB)

>80dB

<0.5% @ 1kHz

203 x 187 x 42mm

845g

Ensure power adapter is connected to mains and working properly

Ensure receiver is switched on (press front power button until it lights)

Ensure each transmitter is switched on

Check that each transmitter is not out of reception range

Check that all transmitter batteries are good/charged

Check that each transmitter switch is switched on

Ensure each transmitter has good/charged batteries

Ensure there is no other nearby transmitter with the same frequency

Make sure receiver is properly connected to mixer/amplifier

Ensure that receiver and amplifier/mixer channel volumes are turned up

Turn down the relevant channel VOLUME on receiver

Turn down gain on bodypack transmitters

Reduce gain on mixer/amplifier

Ensure that an XLR output is not fed to a "Hi-Z" line input

Turn up VOLUME on receiver

Turn up gain on bodypack transmitter

Increase gain of mixer/amplifier input

Ensure that the jack output is not fed to an XLR input with "Lo-Z" level

Check transmitter batteries

SU20-B-RG

SU20-B-BY

N/A

110 x 676 x 24mm

74g (no battery)

http://www.avsl.com/assets/doc/1/7/171907UK.pdf

http://www.avsl.com/assets/doc/1/7/171908UK.pdf

http://www.avsl.com/assets/doc/1/7/171917UK.pdf

http://www.avsl.com/assets/doc/1/7/171918UK.pdf

Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

Directive 2014/53/EU

SU20 User Manual