Dell PowerEdge 1300 Instrukcja aktualizacji - Strona 18
Przeglądaj online lub pobierz pdf Instrukcja aktualizacji dla Serwer Dell PowerEdge 1300. Dell PowerEdge 1300 23 stron. Video update
Również dla Dell PowerEdge 1300: Instrukcja aktualizacji (24 strony), Aktualizacja instrukcji (2 strony)
Drukuj stronę
support.dell.com
!" #
!
&
'
The plastic cooling shroud inside the system is used to improve airflow over the
microprocessors. You may need to remove this shroud to access certain components
on the system board.
"
#
To remove the cooling shroud, perform the following steps.
1.
Turn off the system, including any attached peripherals, and disconnect the
power cable from the electrical outlet.
2.
Remove the right-side computer cover.
3.
Unscrew and remove the two retention pins (see Figure 1-7).
4.
Remove the shroud by lifting the end of the shroud closest to the microproces-
sor(s) until the opposite end of the shroud disengages from the cooling fan on
the system back panel.
Dell PowerEdge Systems — Microprocessor Upgrade
1-15