Dell PowerEdge 350 Instrukcja instalacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik Dell PowerEdge 350. Dell PowerEdge 350 32 stron. Wake-on-lan (wol) support on dell servers
Również dla Dell PowerEdge 350: Aktualizacja informacji o diagnostyce systemu (2 strony), Aktualizacja informacji (30 strony), Instalacja sprzętu (22 strony), Podręcznik (15 strony)

support.dell.com

Installing the Inner Rails on the System Chassis

Locate the two inner rails and position one to the side of the chassis (see

Figure 1-7).

Ensure that the flat end of the inside rail is toward the front of the chassis and

that the end with two threaded holes is located at the back of the chassis. The

flat central part of the inside rail must be facing the chassis, with the raised upper

and lower rail surface facing outward (see Figure 1-7).

Figure 1-7. Securing the Inner Rails to the System Chassis

Secure each inner rail to the chassis using two 10-32 x 0.25-inch flat-head screws.

CAUTION: Due to the size and weight of the system, never attempt to install

the system by yourself.

Remove the optional bezel from the system front panel. Press the tab on each

end of the bezel and pull the bezel straight out from the chassis.

Lift the system into position in front of the installed mounting bracket.

Rack Installation Guide

1-9