Dell poweredge VRTX Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przełącznik Dell poweredge VRTX. Dell poweredge VRTX 35 stron. Server
Również dla Dell poweredge VRTX: Podręcznik dla początkujących (30 strony), Uwaga dotycząca wydania (5 strony), Podręcznik dla początkujących (14 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik techniczny (45 strony), Pierwsze kroki (2 strony)

begins rebuilding until the virtual disk is optimal. After the failed disk is replaced (in the same slot) and the rebuild to the

hot spare is complete, the controller automatically starts to copy data from the commissioned hot spare to the newly-

inserted disk. After the data is copied, the new disk is a part of the virtual disk and the hot spare is reverted to being a

ready hot spare. This allows hot spares to remain in specific enclosure slots. While the controller is reverting the hot

spare, the virtual disk remains optimal.

NOTE: The controller automatically reverts a hot spare only if the failed disk is replaced with a new disk in the

same slot.

NOTE: A Replace Member operation typically has a temporary impact on disk performance. After the operation

completes, the disk performance returns to normal.

Controller Cache Preservation

The controller is capable of preserving its cache in the event of a system power outage or improper system shutdown.

The Shared PERC 8 controller is attached to a Battery Backup Unit (BBU) that provides backup power to transfer

contents of the DRAM to Non-Volatile Cache (NVC) during system power loss.

Cache Preservation With Non-Volatile Cache

The Cache Preservation With Non-Volatile Cache (NVC) module allows controller cache data to be stored indefinitely. If

the controller has data in the cache memory during a power outage or improper system shutdown, a small amount of

power from the battery is used to transfer cache data to a non-volatile flash storage where it remains until power is

restored and the system is booted.

Recovering Cache Data

If a system power loss or improper system shutdown has occurred:

Restore the system power.

Boot the system.

Ensure all online physical disks are still connected.

Access the Dell Chassis Management Controller (CMC) to discard pinned cache.

If you do not see the Discard Pinned Cache option, it indicates that all preserved cache data is written to the disks

successfully.

NOTE: If there is pinned cache in Shared PERC 8, the option to clear the pinned cache is present in the CMC. If

there is no pinned cache, this option is not displayed in CMC and this indicates that the cache data is

recovered.

NOTE: For detailed navigation of the CMC for Shared PERC 8, see the

Dell PowerEdge VRTX User's Guide at dell.com/esmmanuals.

A transparent learn cycle is a periodic operation that calculates the charge that is remaining in the battery to ensure

there is sufficient energy. The operation runs automatically, and causes no impact to the system or controller

performance. The controller automatically performs the Transparent Learn Cycle (TLC) on the battery to calibrate and

gauge its charge capacity once every 90 days. If required, the operation can be performed manually.

NOTE: Virtual disks stay in Write Back mode, if enabled, during transparent learn cycle. When the TLC completes,

the controller sets the next TLC to +90 days.

Dell Chassis Management Controller for