Miele DA2280 Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Okap wentylacyjny Miele DA2280. Miele DA2280 19 stron. Ventilation system
Również dla Miele DA2280: Instrukcja obsługi i instalacji (36 strony), Wymiary (1 strony), Instrukcja obsługi i instalacji (40 strony), Instrukcja obsługi i instalacji (40 strony), Instrukcja obsługi i instalacji (44 strony)

Installation

^ Please read the "Important Safety

Instructions" and Installation

instructions before installing this

hood.

The hood comes equipped with a

non-return flap. This flap automatically

closes when the hood is turned off so

that no exchange of outside air and

room air can occur.

Uninstall the non-return flap when your

exhaust system is equipped with a

non-return flap or if the hood is used in

recirculation mode.

^ Holding the non-return flap at the

wire, pull it out of the bracket.

The DA 2280 is equipped with one, the

DA 2210 with two non-return flaps.

CAUTION

To avoid risk of hand or other injury,

avoid contact with sharp edges

during the assembly and installation

process.

Installation

The hood is designed to be installed

within cabinetry and kitchen islands.

The top half (motor and fan assembly)

should be accessible after installation.

If the motor and fan assembly are not

accessible, assemble the ductwork and

the electrical connection before the

installation.

^ Insert and align the hood from the

bottom up in the cut out.

^ Secure the hood through the frame

with the screws (3.5 x 16 mm).