HP 8100 - Elite Convertible Minitower PC Instrukcja konfiguracji i ustawień - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji i ustawień dla Pulpit HP 8100 - Elite Convertible Minitower PC. HP 8100 - Elite Convertible Minitower PC 48 stron. Hp compaq convertible minitower business pc
Również dla HP 8100 - Elite Convertible Minitower PC: Specyfikacje (2 strony), Podręcznik szybkiej konfiguracji i rozpoczęcia pracy (21 strony), Lista wsparcia (34 strony), Instrukcja konfiguracji oprogramowania (9 strony), Ilustrowana mapa części i usług (4 strony)

BIOS Prerequisite

This whitepaper is for the HP Compaq 8100 Business PCs. The HP Compaq 8100

Business PC uses the 786H1 BIOS family.

For best performance and to take advantage of AMT 6.0 features, make sure the

HP Compaq 8100 Business PCs have a BIOS revision of at least version 1.02, a ME

FW of at least version 6.0.3.1 195, and a MEBx of at least version 6.0.3.0019.

The system BIOS and the ME FW must be updated individually. Refer to the BIOS

Flash Whitepaper at www.hp.com for more information on flashing the system

BIOS and ME FW.

Manual Mode (SMB Mode) – AMT Setup and Configuration

Steps:

When going through the options in the MEBx for the first time (Factory phase), the

default settings are in place. This whitepaper details HP recommended settings on

options, some of which may be the same as the default selection. Even though the

default setting is set and used for certain options, it is good practice to double

check important options.

Hit Ctrl-P during POST to enter Management Engine BIOS Extension (MEBx)

Setup.

This option is by default not shown during the HP splash screen.

It can be displayed during POST if set in F10-Setup.

Figure 1: Intel MEBx Password Screen