ALLNIC AUDIO H-1200 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz ALLNIC AUDIO H-1200. ALLNIC AUDIO H-1200 8 stron. Phono stage
Drukuj stronę
INTRODUCING THE H-1200 PHONO STAGE
The H-1200 is Allnic Audio's entry level phono stage. Like
all Allnic Audio products, it uses Permalloy (iron and
nickel alloy) for its transformer (step-up) cores. Allnic is
grateful to Mr. G.W. Elmen of Western Electric for
inventing Permalloy for transformer core use, and in so
doing, providing an enormous service to recorded music
listeners everywhere.
The H-1200 has the following features:
Quality Permalloy core MC step-up transformers
included; no need for an external MC step-up device.
MM / MC dual input possible
RIAA equalization, CR type, precisely compensated
within ±0.3db
Automatic semi-conductor voltage regulation circuit
ensures quieter operation. It also protects the tubes
from AC Line voltage fluctuations and sufficiently
copes with any abrupt internal current demands.
Small size, which makes it possible for the H-1200 to
be installed near the turntable and to use
interconnection cables that are as short as possible
Pure, non-negative feedback circuit
Pure class A operation
As are all Allnic Audio products, the H-1200 is fully
RoHS (EU Reduction of Hazardous Substances
regulation) compliant in construction and materials
WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
One (1) Allnic H-1200 phono stage – in natural
aluminum or black finish in accordance with your
order
One (1) power cord
One (1) Owner's Manual
Note:
1)
The H-1200 ships with the tubes installed.
2)
The H-1200 will work with most IEC type
aftermarket power cords. Of course, only you can
determine the power cord that works most
synergistically with the H-1200 in your system.
We advise that you keep the box and other packing
materials that your H-1200 came in. It will be useful if you
sell your H-1200 or in the unlikely event you need to ship
it for service.
SAFETY
Disconnect the power cord by pulling the plug,
not the cable.
Keep the power cord away from any heat source.
Keep the unit away from liquids – do not allow
any liquid to enter the interior of the unit.
When the unit is moved from a cold to a warm
environment, allow sufficient time for any
condensation to evaporate before plugging the
unit into an AC connection.
Do not attempt any repairs.
See the notes on "Location, Location, Location".
CLEANING
A.
Chassis
Use only a soft, lint-free cloth dampened slightly with
water only (NO cleaning fluids!) to clean the faceplate
and chassis.
B.
Connectors
You may use any good quality contact cleaner
recommended for such applications to clean the contacts
from time to time, as you deem appropriate.
INITIAL SET-UP
A.
LOCATION, LOCATION, LOCATION
Like all audio products using tubes, the Allnic Audio H-
1200 needs to be placed on a solid stand in a location
that provides for good air circulation around the phono
stage.
DO NOT place the unit on carpet or foam.
4