Chroma Magic Box EtherSwitch 7F Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przełącznik Chroma Magic Box EtherSwitch 7F. Chroma Magic Box EtherSwitch 7F 9 stron. Network switch
Również dla Chroma Magic Box EtherSwitch 7F: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę2.5 Installation
Unique Magic Box interlocking enclosure facilitates easy rack mounting when used in pairs and easy truss mounting via
captive nut insert. Rack mounting brackets are available in single unit and dual unit versions.
Note: for truss mounting, we recommend the use of a ½"-13UNC x ¾" long bolt to avoid damage.
3.
Troubleshooting
Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad connections, faulty cables and
power supplies). For technical advice and/or parts, please contact your selling dealer or the offices listed in this manual.
Symptom
LED indicator for power is off.
Speed LED lights amber upon cable
diagnostic.
Speed LED lights is off.
No connection detected.
4.
Specification
4.1 Technical specifications
Product Code:
Dimensions:
Weight:
Power:
Power connector:
Ethernet Switch Type:
Ethernet Protocols:
RJ45/EtherCon Port:
RJ45/EtherCon:
RJ45/EtherCon MDI/MDIX:
RJ45/EtherCon TD and RD polarity:
OpticalCon Port:
MAC Addresses Supported:
VLAN Supported:
Jumbo Frame Support:
Buffer Memory:
Memory Bandwidth:
Magic Box EtherSwitch 7 User Manual
Possible Cause
Power cord is not connected properly.
There is no power at the source.
Loose connection; damaged cable;
damaged connector;
no connection.
Poor connection. Possible
transmission fault at the source.
Electronics fault in unit if it is
connected to a 100/1000Mbps
Ethernet device.
CHES07F
280mm x 220mm x 88mm
11" x 8.6" x 3.5"
3.5kg / 7.8lbs
100-240V AC, 50-60Hz, 0.4A
IEC
Intelligent store & forward
All IEEE 802.3
Shielded 10BaseT/ 100BaseTX/ 1000BaseT
Auto-negotiation
Auto-crossover
Auto-polarity
1000 Mbps
8192
4096
up to 9.6K
144 Kbytes
16 Gbps for full wire speed on all ports
www.chroma-q.com
6
Solution
Check power source, power cord and
connector.
Replace damaged cable.
Check connector.
Check connection/connectors.
Check Ethernet device.
Call selling dealer.
V1.1 September 2012