ALLOY ACCESS KLIKFOLD UNIT Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Systemy podnoszenia ALLOY ACCESS KLIKFOLD UNIT. ALLOY ACCESS KLIKFOLD UNIT 2 stron.

Drukuj stronę
LOW LEVEL
Klikfold Unit
Assembly Instructions
Ensure all parts are present and are not damaged before
assembling
Klikfold Basic Unit
Comprising of...
4 x K548 - Castors with adaptors
1 x KFFU - Klikfold Base unit
1 x KFPT - Klikfold Trapdoor platform
1.
Ensure that all castors are firmly fitted to the folding frame by
tightening the bolt located directly under the castor housing.
2.
Open folding frame and engage toggle clamps.
3.
Position platform on a rung at desired level.
4.
Always gain access to the platform via the trapdoor, when
appropriate.
Klikfold Guardrail Set
Comprising of...
2 x TTGF - Guardrail frames
4 x BKH1 - 2m Horizontal braces
1.
Fit the guardrail frame to folding frame
2.
Engage interlock clips
3.
Fit four horizontal braces to vertical
members of the frames. Hooks must face
outwards on the vertical.
Klikfold Toeboard Set
Comprising of...
1.
2 x TKL1 - 2m Toeboard length
2 x TKSW - Single width Toeboard end
1. Fit the toeboards around the platform as
illustrated to create a barrier around the
foot area.
1.
Manufactured To a TUV Certified ISO 9001:2008 Quality Control System
KLIKFOLD UNIT
Platform Height
Safe Working Load
Dimensions
Weights
General Safety Rules:
1.
Do not use on unstable ground such as loose
bricks, boxes or blocks.
2.
Remove all personnel and materials before
moving the unit.
3.
When moving the unit, apply force manually by
pushing at the base.
4.
Do not gain extra height by using boxes,
ladders, on the platform.
5.
Ensure that the castors are locked before use.
6.
Do not overload the unit.
7.
Do not overreach out of the unit.
MAX SAFE WORKING LOAD FOR
PLATFORM / STRUCTURE
250KG
Klikfold Unit
0.2m – 1.7m
250Kg
0.7m Width x 2m Length
Basic Unit = 44 Kgs
G'rail Pack = 12.5 Kgs