Miller Axcess 675 Instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria spawalnicze Miller Axcess 675. Miller Axcess 675 48 stron. Automatic welding interface and arc welding power source
Również dla Miller Axcess 675: Instrukcja obsługi (48 strony)
Drukuj stronę3-3. Duty Cycle And Overheating
Overheating
3-4. Volt-Ampere Curves
80
70
60
50
40
30
20
10
0
0
100
200
OM-217 751 Page 12
100% Duty Cycle At 675 Amperes
Continuous Welding
0
Minutes
CV MODE
300
400
500
600
AMPERES
15
OR
Reduce Duty Cycle
700
800
900
1000
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, and cooling
fan runs. Wait fifteen minutes for
unit to cool. Reduce amperage or
duty cycle before welding.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
A/V
duty1 4/95 − 206 789-A
Volt-ampere curves show minimum
and maximum voltage and amper-
age output capabilities of unit.
Curves of other settings fall be-
tween curves shown.
.
This volt-ampere curve repre-
sents the dynamic output of the
unit with a static load.
va_curve1 4/95 − 221 502-A