Panasonic AG-AC90EJ Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera Panasonic AG-AC90EJ. Panasonic AG-AC90EJ 36 stron. Memory card camera-recorder
Również dla Panasonic AG-AC90EJ: Instrukcja serwisowa (24 strony)

Drukuj stronę

To remove the battery

Main Power Battery (Lithium ion Battery)

(Refer to page 17 for the detail.)

Press the battery release button.

Back-up Battery (Lithium Battery)

≥ For the removal of the battery for disposal at

the end of its service life, please consult

your dealer.

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

Note regarding the Power Management function specified under COMMISSION REGULATION

(EC) No 1275/2008 implementing Directive 2009/125/EC of the European Parliament and of the

Council.

This device is designed and manufactured for use at a broadcasting station and/or in a similar

environment.

This device is not equipped with a Power Management function or the Power Management function

is set to OFF as it will prevent the device from fulfilling its intended purpose for the reasons below.

If the device is a Studio Camera, a Weather Camera, a Mixer or other processor:

A Power Management function may cause the device to suddenly stop during recording

or while On Air.

If the device is a Studio Monitor:

A Power Management function may cause video for the confirmation of whether a signal

is normal, or whether the signal has been lost, to be un-viewable.

If the device is a Camera Recorder:

A professional camera recorder must be able to start quickly at any time, but a Power

Management function will cause an increase in the time taken to resume from Stand-by

mode.

Remote Control Battery (Lithium Battery)

Push the catch in the direction shown by

arrow A to remove the holder.

Remove the button-type battery from the

battery holder.

(ENG) VQT4M93