Panasonic AG-DVC 200E Instrukcja obsługi - Strona 23

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera Panasonic AG-DVC 200E. Panasonic AG-DVC 200E 44 stron. Digital video camera recorder

Time data settings

When both the user's bit and time code are to be used, the user's bit is set first.

The time code can be set from 00:00:00:00 to 23:59:59:29.

By setting the user's bit, memos (date, time) and other information

consisting of up to 8 hexadecimal digits can be recorded on the

sub-code track.

Set the COUNTER/TC/UB switch to UB.

Set the TCG switch to SET.

"UBG ¢¢:¢¢:¢¢:¢¢" now appears in the viewfinder. Select

a number for the flashing part by rotating the JOG dial button,

and press the JOG dial button to enter it. When the number is

entered, the flashing moves to the next character on the right

so that another number can be input in the same way until the

user's bit is set.

Set the TCG switch to F-RUN or R-RUN.

Select the "UB MODE" on the sub-menu

<VTR FUNCTION> screen. (See page 34)

Concerning the user's bit memory function

The user's bit settings (except for the actual time) are automatically

stored in the memory and retained even after the power has been

turned off.

<Notes>

≥When DATE is selected for "UB MODE" on the sub-menu <VTR

FUNCTION>, the year/month/day on the TIME/DATE screen will

function in real time.

≥When TIME is selected for "UB MODE" on the sub-menu <VTR

FUNCTION>, the hours/minutes/seconds on the TIME/DATE

screen will function in real time.

Set the COUNTER/TC/UB switch to TC.

Set the TCG switch to SET.

"TCG ¢¢:¢¢:¢¢:¢¢" now appears in the viewfinder. Set

the time code by performing the same operations used to set

the user's bit.

Set the TCG switch.

Set this to F-RUN to advance the time code in the free-run

mode or R-RUN to advance it in the rec-run mode.

<Note>

The backup accuracy of the time code will be out by several frames

when the POWER switch has been set from ON to OFF and then

back to ON again.

22 (E)