Panasonic WV-SW559 Instrukcja instalacji - Strona 40
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-SW559. Panasonic WV-SW559 48 stron. Ip video cameras
Również dla Panasonic WV-SW559: Specyfikacja (2 strony), Uwaga dotycząca integracji (8 strony)
Drukuj stronę
c
Select the camera you want to configure, and click [Access Camera].
Note:
• When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same
MAC address as the MAC address printed on the camera that you want to configure.
v
If the installation screen of the viewer software "Network Camera View 4S" is displayed, follow
the instructions of the wizard to start the installation. (The viewer software is installed from the
camera.)
• The "Live" page will be displayed.
• If you cannot install the viewer software "Network Camera View 4S" or if images are not
displayed, click the [Install] button next to [Viewer Software] on the launcher window to
install the software.
• Perform the [Time & date] settings in the "Setup" - "Basic" page before using the camera.
Note:
• When no image is displayed on the "Live" page, refer to the Troubleshooting in the Operating
Instructions on the provided CD-ROM.
• It is possible to enhance the network security by encrypting the access to cameras using the
HTTPS function. Refer to the Operating instructions on the provided CD-ROM for how to con-
figure the HTTPS settings.
• Click the [Setup] button on the "Live" page, the user authentication window will be displayed.
Enter the default user name and password as follows, and log in.
User name: admin
Password: 12345
• When changing settings related to the network settings, such as connection mode, IP address,
and subnet mask, click the [Network Settings] button in [IP Setting Software] screen as shown
in step 3, then change each setting.
• Due to security enhancements in "IP Setting Software", "Network settings" of the camera to be
configured cannot be changed when around 20 minutes have passed after turning on the
power of the camera. (When the effective period is set to "20 min" in the "Easy IP Setup
accommodate period".)
However, settings can be changed after 20 minutes for cameras in the initial set mode.
• "Network Camera Recorder with Viewer Software Lite" which supports live monitoring and
recording images from multiple cameras is available. For further information, refer to our web-
site (http://security.panasonic.com/pss/security/support/info.html).
40