Panasonic BMET500 - CAMERA HEAD UNIT Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy Panasonic BMET500 - CAMERA HEAD UNIT. Panasonic BMET500 - CAMERA HEAD UNIT 24 stron. Iris camera
Drukuj stronęI Installation
The unit can be mounted over the wall as described.
1. Attach the anchor into the wall, and then attach the sup-
plied mounting bracket to the anchor. (Refer to the fig-
ure in p.14.)
The anchor bolt should meet the standards shown in
the illustration.
10 mm {2/5 in.} or less
Mounting bracket
2 mm {2/25 in.} (D)
Wall Type
Concrete wall
Plaster wall
12
Screw Type
TAPMARK concrete screw anchors
Part No. 21230,
Size 6.35 x 57.15 mm {1/4 x 2 -1/4 in.}
TAPMARK concrete screw anchors
Part No. 21240,
Size 6.35 x 69.85 mm {1/4 x 2 -3/4 in.}
2. Remove the shipping lock as follows:
Locked
1
Belt
(1) Remove the screw.
3
Unlocked
(3) Bend the belt and secure it with the screw.
• Take care not to drop the screw inside the unit.
• You can use an M3 screw if you have lost this screw.
3. Remove the numeric keyboard.
You can remove the keys by taking off the two tamper-
proof screws (with the supplied tamperproof screw dri-
ver tool) and lifting up the keyboard. The control cable
should also be removed.
Remove the tamperproof screws.
2
(2) Insert the belt until it hits
to the stop.