Panasonic DMC-FT2 Podstawowa instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Podstawowa instrukcja obsługi dla Aparat cyfrowy Panasonic DMC-FT2. Panasonic DMC-FT2 40 stron. Brochure
Również dla Panasonic DMC-FT2: Broszura (2 strony), Podstawowa instrukcja obsługi (36 strony)

Panasonic DMC-FT2 Podstawowa instrukcja obsługi
1:With the [LOCK] switch released, close the card/
battery door and terminal cover by pushing until you
hear a click.
To prevent water seeping into the camera, be careful not to trap foreign
objects such as liquids, sand, hair or dust etc.
Closing the door with the [LOCK] switch in the locked state may result in
damage or leaks.
2:Slide the [LOCK] switch in the direction of the arrow
until the visible red portion is no longer visible and the
switch is locked.
If you use the camera without securely closing the door and cover, it may
open and close of its own accord.
Red part
N:
O: [LOCK] switch (grey part)
P: Released state
Q: Locked state
Note
If there is any foreign object, remove it
with attached brush.
Sand and dust etc. will unintentionally
adhere to the camera by lodging in
between the gap around the card/
battery door or terminal cover when
used in the following locations:
Where sand is floating, such as in the
sea or water etc.
Where there is a lot of sand or dust,
such as at the beach or in a sand box
etc.
To prevent unintentional opening of the card/battery door and terminal
cover, it is recommended to use the supplied silicon jacket.
13
(ENG) VQT2M41