Aquatic AQ-BC-6BT Instrukcja obsługi i instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Odtwarzacz multimedialny Aquatic AQ-BC-6BT. Aquatic AQ-BC-6BT 16 stron. Hide-away media player for bluetooth audio & mp3 devices
Również dla Aquatic AQ-BC-6BT: Instrukcja obsługi i instalacji (13 strony), Instrukcja obsługi (11 strony), Instrukcja obsługi i instalacji (14 strony)
Getting Started
1.1 Contents
• AQ-BC-6UBT BlueCube+ Media Player
• 2-Way RF Waterproof Remote Control (AQ-RF-6UBT-T)
• Wiring Harness (AQ-UNH-2 or manufacturers version)
• Four (4) Stainless Steel Mounting Screws
*Retail packaged models only.
1.2 Connections (see Diagram 1.2.1)
1. 12-pin Watertight Harness
The 12-pin harness supplies power and ground connections to the BlueCube+ Media Player
and four (4) speaker channel output connections from the BlueCube+ Media Player (see Wir-
ing Diagram 1.3.1 on page 5).
Do not cut or modify the 12-pin harness on the Bluecube+ side or warranty will be void.
2. FM/AM Radio Antenna Jack
Allows connection of FM/AM radio antenna. For best FM/AM performance make sure the
antenna is extended to the highest achievable position.
3. Auxiliary Outputs - Rear
Allows external amplifiers to be connected to power additional speakers.
4. Auxiliary Outputs - Front
Allows external amplifiers to be connected to power additional speakers.
5. Auxiliary Inputs
Allows an additional RCA input, from a standalone unit or another stereo source.
6. 12V DC External Trigger (x2)
Allows for external lighting or relays to be triggered (2A max load).
7. USB Input
USB for connection of USB devices and USB flash drives. Charges compatible USB devices
when connected.
8. Wired Remote 8-pin DIN Cable
Allows connection of the wired Remote Control (AQ-WR-6F sold separately).
9. Power On LED
When the BlueCube+ is powered On the LED will illuminate red.
10. Bluetooth Halo Aerial Connector
Connect the Bluetooth Halo Aerial Technology Antenna (AQ-BTANT-1) to the male SMA
connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use
hands to tighten the connection (do not use a wrench). See section 1.5.
11. Power Attenuation Wires
The AQ-BC-6UBT power has been factory set to -3dB of maximum power to avoid blowing
very small speakers used spa applications. See section 1.6 for further details.
Aquatic AV does not recommend the wired Remote Control AQ-WR-6F for use in spa applications.
www.aquaticav.com
BlueCube+ Media Player AQ-BC-6UBT
• User/Installation Manual
• Charging Cable
• Mounting Template*
• Bluetooth Antenna
3