Aquatic AQ-BC-6BT-X Instrukcja obsługi i instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Odtwarzacz multimedialny Aquatic AQ-BC-6BT-X. Aquatic AQ-BC-6BT-X 14 stron. Bluecube 'hide-away' media player for bluetooth audio & mp3 devices

Drukuj stronę

Getting Started

1.4. Mounting the BlueCube Media Player

1. Make sure the outside surface is clean and

clear of debris.

2. The BlueCube Media Player has four (4) front

screws. Drive the screws using a screw driver.

Make sure screws are snug and do not over

tighten.

1.5 Bluetooth Antenna Installation

1. Screw on the provided Bluetooth Antenna,

avoiding bending the cable at a 90° angle.

2. Install the Bluetooth antenna as high as

possible, above the waterline of the spa if possible,

and making sure the arrow is pointing directly

upwards towards the sky to ensure the Bluetooth

range is maximized. If there is no suitable surface

to screw it in, we recommend using a good quality

double sided tape.

1.6 Power Attenuation Wires

The AQ-BC-6BT-X Bluecube Media Player's

power can be reduced or increased to suit

different applications. An output level

of -3dB or -6dB should be used to avoid

blowing very small speakers, often used in

spa applications.

By cutting only the white wire the output level will decrease to -6dB below the nominal 0dB.

By cutting both the white and black wires the power/volume will increase to +6dB above the

nominal 0dB.

By cutting only the black wire the power/volume will increase from -3dB to the nominal 0dB.

These modifications should only be carried out by an experienced audio installer.

Should you cut the wrong wires or wish to reconnect them to further alter the attenuation, the Power Attenuation

Wires can be crimped back together.

www.aquaticav.com

BlueCube Media Player AQ-BC-6BT-X

Black Wire

White Wire

Intact (not cut)

Cut

Intact (not cut)

Cut

Output Level

-3dB

-6dB

0dB (reference)

+6dB