Aquatic BLUECUBE6 BC6 MINI Instrukcja obsługi i instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Odtwarzacz multimedialny Aquatic BLUECUBE6 BC6 MINI. Aquatic BLUECUBE6 BC6 MINI 15 stron. Hide-away media player
Drukuj stronęGetting Started
1.2.1 Connections Diagram
1.3 12-pin Harness Connection (retail packaged models only)
If your BC6 MINI was purchased from an Aquatic AV dealer and/or supplied with retail packaging
it is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the BC6 MINI
to power and speakers. Please proceed to section 1.3.1.
If your BC6 MINI was supplied as a pre-installed waterproof entertainment system it will utilise
3rd party wiring connections and is not supplied with the Aquatic AV 12-pin Harness. Please
proceed to section 1.4.
1.3.1 12-pin Harness Wiring Diagram
(Green/Black stripe)
(Green)
(White/Black stripe)
(White)
(Gray/Black stripe)
(Gray)
(Purple/Black stripe)
(Purple)
All open wire connections should be soldered and protected against water and dust for best long-term performance.
www.aquaticav.com
BlueCube Media Player BC6 MINI
8. Electronic Crossover Wire (red/white stripe)
9. Power Attenuation Wires (1x white, 1x black)
No lower than a 2 Ohm load should be used
or damage may occur to the BC6 MINI.
Make sure the polarity of speakers are
connected correctly.
3. RCA Auxiliary Inputs
1. 12-pin Watertight Harness
2. RCA (Rear) Outputs
4. Wired & Wireless Remote 8-pin DIN
Connectors (Black)
5. 12V DC Triggers (2x red, 2x red/black stripe)
6. Power On LED
7. Bluetooth Halo Aerial Connector
4