Aquatic MP6 Instrukcja obsługi i instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Wyposażenie morskie Aquatic MP6. Aquatic MP6 20 stron. Basic din series stereo
Drukuj stronę
Getting Started
1.3 Connections Diagram
2
AM/FM Radio Antenna Jack
5
Right Channel (Red)
4
Left Channel (White)
Right Channel (Red)
3
Left Channel (White)
6
7
!
!
No lower than a 2 Ohm speaker load should be used or damage may occur to the stereo. Make
sure the polarity of speakers is connected correctly.
!
All open wire connections should be soldered and protected against water and dust for best long-
term performance.
*Retail packaged models only.
4
12V DC External Trigger 1 (Brown)
12V DC External Trigger 2 (Brown)
RCA Auxiliary Inputs (Black)
RCA Auxiliary Outputs (Gray)
USB Input (Black)
DAB Input (Black)
Wired Remote Connector (Black)
The Wired Remote Control feature is not currently supported
on the MP600. Please do not use this connector.
MP600: MP6 Basic DIN Series Stereo
FUSE
Fuse
12-pin Watertight Harness*
A-A
1
2
4
5
7
8
10
11
12-pin Watertight Harness*
Pin No.
Wire Color
1
Green
2
Green/Black
3
Red
4
White
5
White/Black
6
Yellow
7
Gray
8
Gray/Black
9
Blue
10
Violet
11
Violet/Black
12
Black
www.aquaticav.com
A
1
A
3
6
9
12
Description
LR Speaker (+)
LR Speaker (-)
Acc (+12V)
LF Speaker (+)
LF Speaker (-)
Battery (+12V)
RF Speaker (+)
RF Speaker (-)
Power AMP Remote
RR Speaker (+)
RR Speaker (-)
Ground