Panasonic SA-AK78 Instrukcja obsługi - Strona 22
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Panasonic SA-AK78. Panasonic SA-AK78 44 stron. Panasonic sc-ak78 cd stereo system operating instructions
Również dla Panasonic SA-AK78: Instrukcja obsługi (45 strony), Instrukcja obsługi (44 strony)
Drukuj stronę
Listening to tapes
To fast-forward or rewind the tape
Press [
] or [
Tape direction
"
"
"
"
To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.
Press [
] or [
To play the current tune
Tape direction
from the beginning
"
"
"
"
Note
The TPS function searches for silent parts of about 4 seconds in length
which are normally found between tunes. As a result, it may not function
properly in the following cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
22
RQT5289
] in the stop mode.
To rewind
To fast-forward
[
]
[
[
]
[
] during play.
To play the next tune
from the beginning
[
]
[
[
]
[
Before recording (Deck 2 only)
Types of tapes which can record correctly
The unit automatically identifies the type of tape.
N
O
R
M
A
L
P
I H
G
H
P
O
M
E
T
A
L
P
O
This system cannot make a recording, or erase correctly, if metal po-
sition tapes are used.
To record from the beginning of the tape
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start im-
mediately.
]
]
Leader tape (no recording can be made)
To start recording from a particular position on
the tape
Wind the tape on to the position you want recording to start from.
To start recording from the reverse side
]
Insert the cassette into deck 2 and follow these steps to change the
side.
]
1. Press [TAPE DECK 1/2] so the deck 2 indicator lights.
2. Press [
] then [
How volume, sound quality/surround effect
recording
The tape you are recording is not affected whatsoever by changes in
volume, sound quality, surround effect and surround system.
In recording, sound quality, surround effect and surround system are
set automatically to "FLAT".
To erase a recorded sound
1. Press [TAPE DECK 1/2].
2. Insert the recorded tape into deck 2.
3. Press [REV MODE] to select reverse mode.
4. Press [
REC/STOP].
Note
• You cannot record when [6CH DISCRETE INPUT] is selected.
• You cannot open deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with the
other.
!
O
I S
I T
O
N
/
T
Y
P
E
@ @ @ @ @
I S
I T
O
N
/
T
Y
P
E
$ $ $ $ $
I S
I T
O
N
/
T
Y
P
E
Recording part
]. Tape direction will be shown as "
".