Olympus DP30BW Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy Olympus DP30BW. Olympus DP30BW 31 stron. Microscope digital camera

HARDWARE INSTALLATION

Fig. 1

Fig. 2

# Be sure to read the instruction manual for the PC in order not to

damage the PC and PCI interface board.

# Be sure to turn off the PC and peripherals and unplug their power

cords before installing the PCI interface board.

# To avoid damage due to static electricity, touch an unpainted metallic

surface of the PC with your hand to leak the static electricity from your

body before installation.

1. Open the cover of the PC's main body.

2. Remove the clamping screw of the slot covers @ of an unused PCI slot

on the Motherboard and remove the two covers.

3. Insert the PCI interface board ² taking care not to touch the board

surface directly by hand.

4. Plug the ATX power supply cable connector ³ of the PCI interface board

² into an unused HDD power supply connector which is directly drawn

from the power supply inside the PC. If the PC in use does not have an

unused power supply connector, use the ATX power supply cable of the

PCI interface board ² as the branching cable.

5. Insert the Trigger IO board | into the slot to the right of the PCI interface

board ².

6. Connect boards ² and | with the connection cable ƒ.

After confirming that the board is inserted and connected securely,

attach the slot cover using the clamping screw removed above.

7. Attach the PC cover to the original position.

8. Connect the interface cable to the connector on the PCI interface board

and tighten the connector lock screws. Check that the interface cable

does not slip out.

(Figs. 1 & 2)