Olympus DP72 Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy Olympus DP72. Olympus DP72 40 stron. Microscope digital camera

HARDWARE INSTALLATION

Fig. 1

Fig. 2

Fig. 3

}If the PCIe extension box and the computer's extension slot are of the

low-profile bracket specifications, it is required to replace the existing

bracket with the low-profile bracket.

1. Prepare flat-blade and Phillips screwdrivers and remove the " – " screws

@ and the " + " screw ².

2. Replace the existing bracket with the low-profile bracket ³ and attach

screws @ ².

DP72 (For Desktop Computer) Set (Figs. 2 & 3)

# Before installing the PCIe interface board in the computer, be sure to

read the instruction manuals for the computer in order not to damage

them.

# Be sure to turn off the computer and peripherals and unplug their

power cords before installing the PCIe interface board.

# To avoid damage due to static electricity, touch an unpainted metallic

surface of the computer with your hand to leak the static electricity

before installation.

# The SATA-to-HDD(4-pin) power conversion adapter is sensitive to

excessive force. Please handle it with care.

1. Open the cover @ of the computer.

2. Remove the clamping screw ³ of the slot cover ² of an unused PCIe

slot on the motherboard and remove the cover.

3. Insert the PCIe interface board | taking care not to touch the board

surface directly by hand, and attach the slot cover using the clamping

screw removed above.

4. Connect the FDD power cable 5 from the computer's power supply to

the power connector 6 on the PCIe interface board |.

If your computer does not have an available FDD power cable or the

FDD power cable is too short, connect the provided HDD-to-FDD power

conversion cable from the computer's HDD power cable to the power

connector 6 on the PCIe interface board |.

And if your computer does not have an available HDD(4-pin) power cable,

connect the provided SATA-to-HDD(4-pin) power conversion adapter and

HDD(4-pin)-to-FDD power conversion cable from the computer's SATA

power cable to the power connector 6 on the PCIe interface board |.

5. Attach the computer cover @ to the original position.

(Fig. 1)

(Figs. 2 & 3)