Olympus PR-V434Q Podręcznik - Strona 17
Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt medyczny Olympus PR-V434Q. Olympus PR-V434Q 18 stron. Single use cannula v
Drukuj stronę
An Essential Tool to achieve a New Level of Efficiency
in Biliary-Pancreatic Procedures. Designed to Enhance
the Revolutionary Exchange Capability of the V-System.
130mm
The LinearGuideV has been designed to provide
superior insertion capability, maximum endoscopic
visibility, and easy device exchange. When the
LinearGuideV's spiral markings are visible from
the scope tip, the guidewire can be locked to
simplify device exchange.
All Designs are Optimized to Assure Smooth,
Efficient Guidance of Devices to the Bile And Pancreatic Ducts
Hydrophilic Coating Length:
Two-step markers ensure visibility
in the endoscopic field of view
50mm
Two-step markers on the Linear GuideV make
120mm
it easy to confirm the movement and position
of the guidewire within the endoscopic field of view.
2700mm / 4500mm
Hydrophilic Coating Length:
50mm
120mm
2700mm / 4500mm
Ring-marker section
Spiral-marker section
Ring-markers are visible from 50mm
Endoscopic visibility of the spiral-
to 120mm from the distal end to
markers indicates that
help determine duct penetration.
LinearGuideV may be locked in
the V-Groove.
500mm
400mm
PTFE Coating
500mm
400mm
PTFE Coating
Specially coated to insure
smooth wire manipulation
To ensure smooth passage through tight strictures in the bile
duct, the distal 500mm from the tip is coated with a special
hydrophilic coating that provides exceptional lubricity.
The balance of the guidewire is coated with PTFE for
smoother exchange. These coatings allow the
guidewire to be manipulated easily
Two distal tip configurations to suit
different techniques and preferences
The LinearGuideV comes in two tip
configurations — straight and angulated.
The straight tip can be used for a variety of purposes,
while the angulated tip is best suited for passing a
stricture and for selective insertion.
Choose the tip that best suits your techniques
and preferences.
Note:
This instrument meets the recognized standard for high
frequency electrosurgical leakage current - ANSI/AAMI HF-18(1993),
4.2.5.2 and 5.2.5.2 - when used with an Olympus sphinctetorome.
Removal of the guidewire is not necessary during sphincterotomy.