AXT ELECTRONIC VSD Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt rolniczy AXT ELECTRONIC VSD. AXT ELECTRONIC VSD 6 stron. Electronic doorkeeper
Battery Disposal
Do not dispose the batteries in the household
waste, but bring them please to the public or from
private places pursued disposal places (appropri-
ate boxes in supermarkets or similar.) All indicated
battery running times refer to the operation with
our sliders (weight between 300g and 1kg).
Disclaimer
Electronic devices can fail for various reasons. The
usage of our devices does not release you from
the obligation to regularly check and monitor the
welfare of the animals and the function of the de-
vice. We accept no liability for damage and conse-
quential damage resulting from incorrect installa-
tion/operation or defects in the equipment.
Safety instructions
Power supply dry room - The plug power supply
is designed for dry rooms. Please place it dry and
under normal room conditions (humidity). If you
need a power supply unit for humid rooms or
outside, please contact us. We may have some in
stock.
IP class housing - the housing necessarily loses the
IP66 class, because holes in the housing are nec-
essary (cord). However, condensation can escape
better through the openings if the unit is correctly
installed. This also ensures better rear ventilation.
Cable glands and strain reliefs on the VSD/E are
not prescribed or necessary by us, but can be im-
plemented by customers using cable ties or knots
in the cable, if necessary.
Risk of injury during manual intervention - Any
manual intervention in the mechanics of the de-
vice or the slider attached to it represents a risk
of injury. We are not liable for any damage result-
ing therefrom. Make sure that the system is volt-
age-free when interventions are made or when
you touch moving parts.
Submissions due to repairs
Devices under warranty will be repaired by us free
of charge and returned if the defect falls under
the warranty conditions. (Excluded from warran-
ty repairs are devices for which the customer has
already carried out interventions (soldering, paint
removal, etc.) without prior agreement. These de-
vices will be repaired at the customer's expense.)
Devices outside the warranty will be repaired
and returned at the customer's expense. The re-
pair costs depend on the founded error and the
countermeasure taken, but never as high as a new
purchase.
Sequence of a submission for repair:
1. You cannot resolve the error using the table.
2. Contact us if you are not sure what to send.
If possible, send pictures of the devices in
advance by e-mail (cover open + assembly
with door).
3 We usually need the devices + accessories such
as external sensors or the timer together for
repair.
4. We do not need the aluminum door with us!
5. Remove the devices from the installation site.
Remove the fixing screws for the wall.
6. Clean the devices (blow them out with com-
pressed air, remove heavy impurities on/inside
the housing, etc.). Check that no mites are
present in the device.
7. Pack the devices, power supply (battery holder,
batteries, power supply unit), + further acces-
sories (timers, ext. cable extensions) safely in
a package.
8. Put in a note with error description as well as
your contact data and remarks. This speeds up
AXT-electronic GmbH & Co. KG
Wartburgstrasse 10
99817 Eisenach / GERMANY
Phone: 0049 3691 721070
www.axt-electronic.de
the repair.
9. Send the devices to:
AXT-Electronic GmbH & Co. KG
-Repair-
Wartburgstraße 10
D-99817 Eisenach, Germany
10. If we indicate that only the printed circuit
board is to be sent in, it is also sufficient to
send the printed circuit board in a padded
envelope and as a letter.
11. The repair will usually not take longer than 4
days. The transport time to us and back to you,
can hardly be influenced by us.
12. For submissions from Switzerland or USA:
Please contact us in advance. There are points
that have to be considered during customs
processing and should be discussed with us.
Otherwise deliveries can be delayed consid-
erably.