AXVAC TEC 7300 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pistolet do kleju AXVAC TEC 7300. AXVAC TEC 7300 12 stron.

Remove the rubber cap

Remove the nozzle cover with pliers while

the gun is still hot.

WARNING: Always wear heat resistant gloves

since both the nozzle cover and the nozzle is hot.

NOTE: Put the spray gun on a piece of masking

paper while repositioning the nozzle. Hot adhesive

can drip from the gun while the nozzle/nozzle

cover is dismantled.