Epson 1400 CFS Instrukcja instalacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Drukarka Epson 1400 CFS. Epson 1400 CFS 15 stron.

Vacuum Filling An Empty CFS

Remove the caps from the ink bottles and replace them with the caps from the package

supplied with your CFS system.

The vacuum pump must be assembled as shown in the below photo. Check valve direction is

critical.

Remove the white plugs from the end of each of the tubes.

•

Attach the tube from the chamber that is going to be filled to the tube adapter on

•

the vacuum pump.

Pull back on the plunger, all the way. It takes a fair amount of force.

•

Push the plunger back down to the bottom to expel air.

•

Pull back on the plunger again, all the way and push down to expel air.

•

After 3 or 4 pulls, the plunger should snap to the bottom if let go.

•

Let the vacuum pump rest for about on minute. This is a leak test.

•

S a v e

M o n e y

MIS Associates Inc

http://www.inksupply.com

a n d

I m p r o v e

2901 Auburn Rd

Fax: 248-289-6013

Y o u r

Auburn Hills, MI 48326

P r i n t i n g

800-445-8296