Epson ActionLaser 1400 Podręcznik użytkownika - Strona 19
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Drukarka Epson ActionLaser 1400. Epson ActionLaser 1400 30 stron. Flatbed inkjet printer
Również dla Epson ActionLaser 1400: Podręcznik użytkownika (8 strony), Przeczytaj tę pierwszą instrukcję (27 strony)
Drukuj stronę
Flatbed Inkjet Printer
3．Sometimes to the edge of the object, there might with more liquid of the coat, you can repair it by
blade before printing & after printing。
Note：
1．During the operating of processing coat, please avoid having over liquid on the object.
2．Please do not touch the coat before drying of the coat, avoid to interfere the printing quality,
please also did not touch the coat after drying。
3．Before processing the coat, please have all clean to the contamination of the surface about the
printing object。
4．You can master the skills of operating for processing the coat with simple practice before use,
and please master the debugging skill for the coat to different materials。
5．The coat would be a fast dry in the nature conditions, it will cost about 4-8 minutes, (with
different materials base, there will with difference to the time), if by air dryer, it will cost about
1 minute, but you have to care for the distance at 30cm between coat and the dryer, avoid
unbalance effect to the printing outputting。
6．Please select the dryer with conditions for low speed, low noise, unless, you can also select your
oven to dry the art works which be printed。
B．Consolidating Liquid
When you have coat processing on the surface of mineral (Such as glass, metal, tile etc.) after the
job of printing, please don't put the art works in the circumstance of dankest conditions, unless, the
image would be easy scraped. For long life conservation to the artworks, please use the Consolidating
Liquid, it will improve the quality of the image quality. The application way of the Consolidating Liquid
are same to the coat. You can following the
Method of processing to the coat, you have to use the Consolidating Liquid to process on the
surface of the media, after drying, please have the coat on the surface of the Consolidating Liquid, in
about 5 minutes later, the the Consolidating Liquid would be full dry.
Note：
1．The Consolidating Liquid is kind of sublimation in canary。
2．Please don't have application to the Consolidating Liquid on organic materials, it is just suitable
to something of the mineral, for such as glass, metal board, wooden board etc。
3．Please use the "Consolidating Liquid" before "coat", please put the "Consolidating Liquid" on
the surface of the printing object, when it dried, you can have the coating job on the surface of
"Consolidating Liquid", please understand that the drying way for "Consolidating Liquid" are
１９
１９