Epson C11CE91301 Instrukcja instalacji - Strona 42

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Drukarka Epson C11CE91301. Epson C11CE91301 47 stron.

• If your router or access point has security enabled, determine the kind of security it is using and any

required password or passphrase for connection. Then make sure to enter the exact WEP key or WPA

passphrase correctly.

• Check if your computer is restricting the available wireless channels. If so, verify that your wireless

access point is using one of the usable channels and change to a usable channel, if necessary.

• If you are using a Wi-Fi Direct connection that suddenly disconnects, the Wi-Fi direct password on

your device may have been changed. If necessary, delete the existing DIRECT-xxxxxxxx connection

settings from your device and enter a new password. See your device documentation for instructions.

• If you connected your product to a Windows computer using Wi-Fi Direct and it automatically selected

Access Point Mode, you may have trouble accessing a low-priority Internet connection. Check the

network connection or adapter settings in the Windows Control Panel and set the Internet metric

setting to 100 for your version of the Internet Protocol.

Parent topic:

Network Software Cannot Find Product on a Network

If EpsonNet Setup cannot find your product on a network, try these solutions:

• Make sure your product is turned on and connected to your network. Verify connection using your

product control panel.

• Check if your network name (SSID) contains non-ASCII characters. Your product cannot display non-

ASCII characters.

• Make sure your product is not connected to a guest network.

• If necessary, reinstall your product software and try running EpsonNet Setup again:

1. Reset your product's network settings to their factory defaults.

2. Windows only: uninstall your product software.

3. Initialize your router following the instructions in your router documentation.

Note: If you are reading these instructions online, you will lose your Internet connection when you

initialize your router, so note the next step before initializing it.

4. Download your product software from the Epson website using the instructions on the Start Here

sheet.

• If you have replaced your router, reinstall your product software to connect to the new router.

Solving Network Problems