Archlit LeeSti BrytDyt Trimless 45 Degrees Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt oświetleniowy Archlit LeeSti BrytDyt Trimless 45 Degrees. Archlit LeeSti BrytDyt Trimless 45 Degrees 7 stron.
Drukuj stronęLeeSti BrytDyt Trimless - 45
Installation Instructions
LED module secured to Frame U-channel
Installing (2)Front Steel bars
Module
Mounting block
Magnets
Safety Cables
13. Make sure there is no pinched wire and wirenuts are not interfering with LED module.
14. Insert both Front Steel bars into frame in tilted position and centered to frame length.
15. Slide and push inwards to snap them to magnets. Make sure both upper and lower Front Steel
bars are installed straight and parallel to frame.
16. Front Steel bars are pre-secured to frame by Safety cable, make sure they are placed well
inside frame. The notches on Steel bars at both ends aid in uninstalling. Make sure the side
with notches is placed towards LED module for both Steel bars.
17. To uninstall Front Steel bars insert a allen key into slots provided on them and pull out to
detach bars from magnets. Make sure not to damage drywall.
archlit
42 Ithanell Rd Hopatcong, NJ 07843 USA P 973.577.4400 www.archlit.com
v
Front Steel bars
(attach to magnets)
a r c h l i t
architecture lit
Fixture frame
Front Steel
bars
Safety
Cables
Front steel bars
pre-secured by safety cables
P/N # 493.45-823
Section /
Page 4 of 7