Cisco ASR 920 series Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik Cisco ASR 920 series. Cisco ASR 920 series 42 stron. Aggregation services router
Również dla Cisco ASR 920 series: Instrukcja instalacji (36 strony), Pierwsze kroki (6 strony), Instrukcja instalacji sprzętu (46 strony), Podręcznik (36 strony)
Drukuj stronę
Attaching the Cable Guides
The following figure shows how to install the Cisco ASR 920 Series Router in a 19-inch EIA rack.
Figure 5: Installing the Chassis in a 19-inch EIA Rack
Step 3
Install the four M6x12mm zinc-plated steel screws through the holes in the bracket and into the threaded holes in the
equipment rack posts.
Step 4
Use a tape measure and level to verify that the chassis is installed straight and level.
Attaching the Cable Guides
The Cisco ASR 920 Series Router supports the following cable guides:
• A920-CBL-GUIDE (left and right)—help in routing the cables from all components on the front panel
Note
If the chassis is mounted using 19-inch brackets, you must assemble the cable guides before installing the
chassis on the rack.
To install the cable guides, perform these steps:
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
8
thereby enabling a proper cable-bending radius.
Installing the Cisco ASR 920 Series Router