Cisco ASR-920-12CZ-D Instrukcja instalacji sprzętu - Strona 44
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Przełącznik Cisco ASR-920-12CZ-D. Cisco ASR-920-12CZ-D 46 stron. Aggregation services router
Również dla Cisco ASR-920-12CZ-D: Podręcznik konfiguracji (13 strony)
Drukuj stronę
Receiving the Cisco ASR 920 Series Router
Unpacking and Verifying the Shipped Contents
When you receive your chassis, perform the following steps:
Inspect the box for any shipping damage. If there is obvious physical damage, contact your Cisco service
Step 1
representative.
Unpack the Cisco ASR 920 Series Router.
Step 2
Perform a visual inspection of the chassis.
Step 3
Use
Step 4
discard the shipping container. You will need the container if you move or ship the
Cisco ASR 920 Series Router in the future.
Table 2-2
Cisco ASR 920 Series Router Default Shipping Container Contents
Component
Chassis
Accessories kit
ESD, wrist strap (disposable)
Documentation
Optional equipment
Most Cisco documentation is available online. The Cisco ASR 920 Series Aggregation Services Router
Note
Pointer Card that is shipped with your Cisco ASR 920 Series Router contains links and information
about the various documents that are available online.
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
2-22
Table 2-2
to check the contents of the Cisco ASR 920 Series Router shipping container. Do not
Description
Cisco ASR 920 Series Router chassis
Chassis rack-mount brackets (19-inch EIA) with eight screws
Two cable guides with two screws
One earth lug with two 10-32 screws.
USB Type-A to USB Type-A cable
One disposable wrist strap (optional)
Cisco ASR 920 Series Aggregation Services Router Pointer Card
Check the container for the following optional equipment:
•
Power cord if an AC power supply was shipped. There are no cords for the DC
power supply units.
If you do not specify the type of power cable, US power cable for the AC
Note
router variant is supplied.
Chapter 2
Preparing for Installation
OL-32751-01