Cisco BTS 10200 Softswitch Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przełącznik Cisco BTS 10200 Softswitch. Cisco BTS 10200 Softswitch 29 stron. T.38 fax relay

Drukuj stronę

Cisco BTS 10200 Softswitch T.38 Fax Relay

External Interfaces

This section contains information about the external operational, management, and administrative

interfaces for the T.38 Fax Relay feature, which include the following:

•

Billing Interface

Three new fields have been added to the Call Data Blocks (CDBs) to support the T.38 fax relay feature:

•

Alarms/Events

Table 1

For detailed information about Cisco BTS 10200 Softswitch alarms and events refer to the

Cisco BTS 10200 Softswitch Event Messages Reference.

Table 1

Alarm or Event

FAX_T38_START

FAX_T38_STOP

FAX_FAILURE

Measurements

Table 2

For detailed information about Cisco BTS 10200 Softswitch measurements refer to the Cisco BTS 10200

Softswitch Operations Guide.

Billing Interface

Alarms/Events

Measurements

Provisioning

Fax Indicator—The value of this indicator is dependent on whether or not the call involved any fax

transmissions. This indicator can have one of the following values:

Not Fax = 1

–

Fax Only = 2

–

Voice & Fax = 3

–

Not Fax (1) indicates that no fax transmissions occurred, the other two values (2 or 3) indicate that

faxes were sent or received. If faxes were sent, the number of pages is indicated by the next field.

If faxes were received, the number of pages is indicated by the third field.

Fax Pages Sent—The number of fax pages that were sent during this call (0 through 999).

Fax Pages Received—The number of fax pages that were received during this call (0 through 999).

details the alarms and events that can be generated by the T.38 Fax Relay feature.

T.38 Fax Relay Alarms and Events

lists the T.38 specific traffic counter values reported by the Cisco BTS 10200 Softswitch.

Cisco BTS 10200 Softswitch T.38 Fax Relay Support

External Interfaces