Sharp Notevision PG-M17X Instrukcja obsługi - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Sharp Notevision PG-M17X. Sharp Notevision PG-M17X 37 stron. Digital multimedia projector
Również dla Sharp Notevision PG-M17X: Instrukcja obsługi (36 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (36 strony)

Sharp Notevision PG-M17X Instrukcja obsługi
E
nglish

Appendices

Downloaded from:

Troubleshooting

If you are experiencing trouble with the projector, refer to
the following. If the problem persists, please contact your
local reseller or service center.
Problem : No image appears on screen.
4
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
4
Ensure the pins of connectors are not crooked or broken.
4
Make sure you have removed the lens cap and the projector is
switched on.
Problem : Partial, scrolling or incorrectly displayed image.
4
Press the “Re-Sync” button on the Remote Control or the Panel
Control.
If you use a PC:
4
If the resolution of your computer is higher than 1024 x 768. Follow
the steps outlined below to reset the resolution.
For Windows 3.x:
1. In the Windows Program Manager, click the “Windows Setup”
icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to 1024 x 768.
For Windows 95,98,2000,XP:
1. Open “My Computer” icon, the “Control Panel” folder, and t
hen double click the “Display” icon.
2. Select the “Setting” tab.
3. In the “Desktop Area” you will find the resolution setting.
Verify that the resolution setting is less than or equal to 1024 x
768 resolution.
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
http://www.usersmanualguide.com/
28